Successful Conclusion | Mwelding at Booth T65B of 2026 Yangtze River Delta (Suzhou) Refrigeration Expo, Focusing on Orbital Welding Machine & Equipment for Refrigeration and Heat Exchange Industry

2026-10-29 Visits:

Exhibition Basic Information

l Full Name: 2026 Yangtze River Delta (Suzhou) Refrigeration, Air Conditioning, Ventilation and Cold Chain Equipment Expo

l Date: October 14 – 16, 2026

l Venue: Suzhou International Expo Centre

l Booth: T65B

l Core Exhibits: MWH U-Tube Welding Machine For Heat Exchanger, MWP All-position Tube Sheet Orbital Welding Machine, MWF Closed chamber Tube-to-Tube Orbital Welding Machine, MWHF Circumferential Seam Automatic Welding Equipment, MWA‑200 / MWA‑400 Integrated Intelligent Welding Power Source, MWG Open Orbital Tube Welding Machine, Orbital Welding Carriage

l Industry Pain Points: Limited welding space for dense tube bundles, large quantity of tube-to-tube sheet joints, difficult quality control of thin-wall pipelines, varying working conditions for large shell circumferential seams;

l Keywords: refrigeration pipeline orbital welding machine, heat exchanger U-tube welding machine, tube sheet orbital welding machine, closed chamber tube-to-tube orbital welding machine, Suzhou Refrigeration Expo, Mwelding

Exhibition Overview

The 2026 Yangtze River Delta (Suzhou) Refrigeration, Air Conditioning, Ventilation and Cold Chain Equipment Expo was successfully concluded at Suzhou International Expo Centre on October 14–16. As an important professional exhibition for refrigeration, air conditioning, ventilation and cold chain equipment in the Yangtze River Delta region, this expo gathered manufacturers of refrigeration units, heat exchangers, evaporators, condensers, heat pumps and cold chain refrigeration equipment, as well as HVAC and refrigeration system integrators. It focuses on the localization of refrigeration and heat exchange equipment, high-efficiency heat transfer, intelligent manufacturing and other industrial directions.

Shanghai Mwelding Intelligent Technology Co., Ltd. (Mwelding) appeared at Booth T65B. Centered on automatic welding demands in the prefabrication of heat exchangers, evaporators, condensers, industrial refrigeration units and metal pipelines, we exhibited solutions including MWH U-Tube Welding Machine For Heat Exchanger, MWP All-position Tube Sheet Orbital Welding Machine, MWF Closed chamber Tube-to-Tube Orbital Welding Machine and MWHF Circumferential Seam Automatic Welding Equipment. From dense U-shaped heat exchange tubes, tube-to-tube sheet connections, butt joints of thin-wall metal pipelines to large circumferential seams on equipment shells, Mwelding conducted in-depth exchanges with industry partners on automatic welding equipment selection, process verification and application practices according to pipe material, diameter, wall thickness, joint structure and mass production requirements.

Mwelding at Booth T65B of 2026 Suzhou Refrigeration Expo

Core Exhibits at Booth T65B

This exhibition presented a complete matrix of automated welding equipment tailored for the refrigeration and heat exchange industry, solving industry pain points such as limited welding space for dense tube bundles, consistency of mass-produced tube-to-tube sheet joints, quality control of thin-wall pipelines, and diverse working conditions for large shell circumferential seams. Welds meet the air tightness, hydrostatic test and quality acceptance requirements of refrigeration equipment.


Model

Refrigeration & Heat Exchange Application

Key Benefits

MWH U-Tube Welding Machine For Heat Exchanger

Dense U-tube bundles of evaporators, condensers and heat exchange coils for compact working stations

Dedicated compact welding head to improve welding accessibility in confined spaces. Programmed GTAW autogenous welding. One operator can manage two units to support mass prefabrication of heat exchangers

MWP All-position Tube Sheet Orbital Welding Machine

Tube-to-tube sheet joints for shell-and-tube heat exchangers, condensers and evaporators

Welding head positioning + circumferential motion control, autogenous or wire-feed welding optional. Compatible with stainless steel, carbon steel and titanium alloy. 7×24 continuous operation. No repeated parameter adjustment when changing pipe diameters

MWF Closed chamber Tube-to-Tube Orbital Welding Machine

Circumferential butt welding of thin-wall metal pipes for refrigeration unit piping and connecting pipelines of heat exchange equipment, Φ3.17—Φ219mm

Programmed control of current, speed and circumferential welding. Combined with argon shielding on the head side and backside purging inside pipe to reduce inner wall oxidation risk. Supports storage and recall of up to 990 welding procedures

MWHF Circumferential Seam Automatic Welding Equipment

Large circumferential seams for heat exchanger shell and head connections

Programmed welding realized by special tooling, workpiece rotation and welding process, suitable for mass fabrication of large circumferential seams in workshop

MWA‑200 / MWA‑400 Integrated Intelligent Welding Power Source

Supporting power source for full series of welding heads MWA‑200 and MWA‑400

Automatically generates expert welding parameters according to pipe diameter and wall thickness. Up to 990 sets of parameters can be saved for quick recall in repeated production of multi-specification workpieces


Mwelding at Booth T65B of 2026 Suzhou Refrigeration Expo

Highlights of On-site Communications

During the exhibition, Booth T65B received many process engineers and procurement managers from manufacturers of heat exchangers, evaporators, condensers and refrigeration units, heat pump & chiller suppliers, refrigeration pipe prefabricators, HVAC contractors and refrigeration system integrators. Visitors mainly focused on four major pain points: limited welding space for dense U-tube bundles, batch consistency of tube-to-tube sheet joints, quality control of thin-wall metal pipelines, and matching of circumferential seam equipment for different shell working conditions.

Mwelding process engineers carried out one-on-one evaluations based on on-site demo units and actual heat exchange equipment project cases according to customers’ pipe diameter, wall thickness, material, joint structure and mass production requirements. We explained the selection differences among U-Tube Welding Machine, Tube Sheet Orbital Welding Machine and Closed chamber Tube-to-Tube Orbital Welding Machine, shared the logic for selecting autogenous and wire-feed processes, clarified the applicable boundary of each equipment, and emphasized the coordinated control of shielding gas on welding head side and backside argon purging for stainless steel pipelines.

Many refrigeration and heat exchange equipment manufacturers reached preliminary cooperation intentions on-site, arranging coupon welding tests, factory visits in Suzhou and special process proposals. They hope to rely on automated welding equipment to stabilize the welding quality of heat exchanger tube bundles and thin-wall pipelines to meet mass delivery requirements of evaporators and condensers.

Mwelding at Booth T65B of 2026 Suzhou Refrigeration Expo

Industry Trend Insights

Feedback from this Suzhou Refrigeration Expo shows that in the refrigeration & air conditioning, cold storage equipment, heat pump and cold chain equipment manufacturing industries, procurement focus has shifted from simple equipment purchase toward integrated equipment & process capability, adaptability to narrow tube bundle space, mass production stability and sealing reliability of welded joints.

Dense U-shaped heat exchange tube bundles and tube-to-tube sheet joints are featured with limited welding space and large quantities. Conventional manual welding suffers unstable positioning and fluctuating heat input, which easily leads to incomplete penetration, cold laps, leakage of refrigerant and high scrap rate. Thin-wall metal pipelines have strict requirements to avoid burn-through, porosity and root oxidation of stainless steel. Source welding equipment manufacturers with independent R&D capacity plus full process verification for refrigeration and heat exchange working conditions are gaining growing recognition in the industry.

Mwelding will continuously upgrade the dedicated welding procedure library for refrigeration and heat exchange industries, improve process verification for heat exchanger U-tubes, tube sheets and thin-wall pipeline working conditions. We provide integrated solutions covering equipment supply, process commissioning, coupon test verification and customized tooling for heat exchangers, evaporators, condensers and refrigeration unit manufacturers, supporting high-quality mass production of pipelines for domestic refrigeration and heat exchange equipment.


Request for Technical Discussion

The exhibition has concluded, yet technical communication continues. If you have welding projects involving heat exchanger U-tube bundles, tube-to-tube sheet joints, thin-wall metal pipelines or large circumferential seams on equipment shells, please contact us for:

1. Selection schemes and technical documents of automatic welding equipment for refrigeration & heat exchange working conditions

2. Weld coupon testing and welding process commissioning support

3. On-site demo booking and factory tour reservation

About Mwelding

Shanghai Mwelding Intelligent Technology Co., Ltd. is a National High-Tech Enterprise and Shanghai Specialized, Refined, Differential & Innovative Enterprise. We have more than ten years of experience in precision automatic orbital pipe welding and hold multiple independent welding patents. The company has obtained ISO 9001, ISO 14001 and ISO 45001 certifications, and our products carry CE marking for the EU market. We focus on the R&D and manufacturing of tube-to-tube, tube-sheet, circumferential seam and hot wire cladding welding equipment. Featured with precision, stability, easy operation and high cost performance, we serve thousands of equipment manufacturers at home and abroad, supporting non-standard customized machinery and overseas project delivery. 

l Hotline: +86 21-62507510

l Technical Email: mw@mwelding.com.cn

l Website: https://www.mwelding.com.cn

l Address: Building 7, Sino-German Industrial Park, No.669 Zhongde Road, Songjiang District, Shanghai, China



Leave Your Message


Leave a message